|
Densitometers
High Performance
and Reliability
Ihara
Electronic Industries utilizes advanced microcomputer technology to
ensure superior performance and reliability for its entire line of
densitometric products.
Standard functions include:
| density |
density
difference |
| dot area |
dot gain |
| trap |
print contrast |
| hue error |
grayness |
| saturation |
cast |
| brightness |
auto-function |
| dot
analysis |
|
Menu Driven
Commands
Simply
select the functions desired. No memorization or operation manual
required.
Self-guiding
Prompts
Clear
and concise instructions are prompted across the large graphic LCD
display in every measurement
Help Key Provides
Explanation of Key Functions
Detailed
explanations are available for all measurement functions along with
answers to frequently asked questions
Quick Calibration
It
takes seconds to calibrate using the quick calibration function.
Standard Calibration is also available.
Auto-Function
Auto-function
allows the user to measure density, dot gain and ink trap, interchangeably.
Large Graphic
LCD Display
The
easy to read graphic LCD display allows the user to determine the
precise configuration desired, including right or left handed view,
two or three decimal precision and display options.
Printer and
Computer Interface
The
configurable RS-232C serial interface is capable of linking the
densitometer to a computer or to the Ihara PR-95 printer.
Security User
Code (optional)
As
an option to safeguard your investment, the densitometer may be
set to operate only with the correct user code.
P300
Plate Densitometer
Part Number EQP-IHP300
Ask about our 14 day trial!
| Measurement
Functions |
Measurements
Per Charge |
| Dot
Area (Murray-Davies or Yule-Nielsen) |
Approximately
4,000 (internal testing) |
| Plate
Density |
Warm
Up Time
|
| Automatic
or Manual N-Value Selection |
None |
| Filter
Response |
Measuring
Time |
| RGB:
Status T (ISO 5/3) |
Approximately
1 second |
| Measuring
Geometry |
Operating
Temperature Range |
| 0º/45º
(ANSI PH2.17, ISO 5/4, DIN 16536) |
41ºF
~ 104ºF (5ºC ~ 40ºC) |
| Measuring
Range |
Security
User Code |
| Dot
Area 0%-100% |
(optional) |
| Repeatability |
Dimensions |
| ±
1% |
2
3/4"W x 2"H x 8 1/4"L |
| Accuracy |
(72mm
x 50mm x 210mm) |
| ±
2% |
Weight |
| Light
Source |
1.2
lbs (with batteries) |
| Halogen
Lamp, Approximately 2856ºK |
(530g) |
| Aperture
Diameter |
Computer
Output |
| 3.0mm |
Configurable
RS-232C Serial Interface |
| Detector |
Accessories |
| GaAsP
Photodiode |
Operation
Manual |
| Display
|
Calibration
Standard |
| 128
x 64 Dot Graphic LCD |
AC
Adapter (9V, 500mA, center-negative) |
|
Power
Supply
|
Carrying
Case |
| Ni-Cad
(4.8V), 800mAh |
Serial
Interface Cable (optional) |
| Recharge
Time |
Ihara
PR-95 Printer (optional) |
| Approximately
1.5 Hours |
Software
(optional) |
|
Cable
Harness (optional) |
Revised
February 27, 2010
GWJ co
Hacienda
Heights, CA 91745
Phone 626-336-1134
800-336-1138(USA)
Fax 626-336-2409
Copyright
© 1997-2010 GWJ Co. All rights reserved.
Other products and companies referred to herein are trademarks
or registered trademarks of
their respective companies.
|
|
